Amazingly Increase Your WiFi Signal With a Can

- images Courtesy of The Chive

Are you suffering from poor WiFi signal ? Not able to find a perfect solution for that. So, you are at the right place as you can now amazingly increase your WiFi signal with a can of coke or any other can.
I was also suffering from the same problem as my WiFi signal were very weak and was also searching for a trick to increase my WiFi signal. I just grabbed an amazing trick from WikiHow’s website and tested it on my WiFi. The results were amazingly awesome as the trick worked like a charm!

So, I am going to write  a post on this as many of us are suffering from the same problem that is poor Wifi Signals.

Lets Begin the tutorial:-

THINGS YOU WILL NEED
1. An empty can.

2. A pair of scissors.

3. A utility knife.

4. Some adhesive like m-seal.

PROCEDURE-
1. First you have to wash the empty can to remove all the residue and its smell etc.
2. Now remove its opener/pull tab.
3. Cut the end of the can where there is no opening using the utility knife.
4. Now after cutting and removing the whole base of the can safely cut the opening as shown in the picture.
5. Cut along the middle of the can in a straight line.
6. Now carefully open up the middle piece of the metal by bending it as to make it like a Radar.
7. Congratulations! You have now created your own WiFi booster. Place it on the WiFi antenna and stick the base of the can to the router with m-seal or any other adhesive.

If you are not able to follow the procedure then you can also see the video Above!